Views: 0 Author: Site Editor Publish Time: 2025-07-28 Origin: Site
Hebei Huayu Environmental Engineering Co., Ltd designs and fabricates stainless steel water tanks tailored to the rigorous demands of factory environments. Constructed from high‑grade 304 or 316L stainless steel, these tanks resist corrosion from variable process waters, cleaning chemicals, and ambient conditions common in manufacturing facilities.
Design and Engineering
Prior to fabrication, a site survey assesses installation space, required capacities, operating pressures, and connection points. Plate thickness and reinforcement ribs are calculated to withstand full hydrostatic load, any external footing loads, and seismic or wind forces. All welds are performed using MIG or TIG techniques, then ground and passivated to remove inclusions and restore the protective chromium‑oxide layer.
Key Features
Surface Finish: Interior surfaces are polished to Ra ≤ 0.8 µm to inhibit sediment buildup and facilitate cleaning, while exterior finishes can be matte or brushed per customer preference.
Access and Maintenance: Manways and inspection ports of various diameters provide personnel entry for inspection and cleaning. Roof vents with insect screens prevent debris ingress while allowing pressure equalization.
Instrumentation: Factory‑mounted level sensors, pressure gauges, and temperature probes can be factory‑calibrated and wired to the customer’s DCS or PLC.
Insulation and Cladding (Optional): Closed‑cell foam insulation with aluminum or stainless‑steel jacketing maintains water temperature for hot‑water or chilled‑water applications.
Installation and Commissioning
Tanks arrive as shop‑fabricated modules or fully assembled units depending on site access. A concrete or reinforced‑pad foundation is recommended, with anchoring brackets sized to local code. After placement and piping connection, each tank undergoes hydrostatic testing, then instrumentation is commissioned. Hebei Huayu provides operation manuals and on‑site training covering routine maintenance, safety checks, and passivation procedures.
